Filter
Top Products
MIX 56 User Manual 2 Installation
122188-10 A0 Telect, Inc.
2-13
Installing M13 Cards
ALERT
!
ALERT! To avoid electrostatic discharge, always
wear a grounding strap plugged into the ESD jack
when handling any MIX 56 components.
Step Action
1. Open the card door and loosen the two captive screws (one per
side) holding the M13 card door in place. Remove the door:
2. Align the card with the card guides and gently insert it into the
chassis by pressing the ejector handle against the card and pushing
the card back.
See the illustration on the next page.
A
B