Filter
Top Products
4 Software Operation MIX 56 User Manual
4-26 Telect, Inc. 122188-10 A0
9. To apply the configuration to the selected channel, tab to the
[Apply] button and press Enter.
To apply the configuration to all channels, tab to the [Apply All]
button and press Enter.
NOTE
When you apply the configuration to all channels, the name is not
applied to each channel. You must configure each channel name
separately.
In either case, a prompt appears telling you this is a service-affect-
ing procedure and asks if you want to continue.
10. Type y and press Enter.
After a brief delay, the lower frame displays the new configuration.
Saving a Configuration
In the Save Configuration screen you can save up to three system configu-
rations in non-volatile ram, (NVRam), or you can save the entire NVRam
configuration to a file.
A saved configuration in NVRam contains all the settings from the System
Settings screen, High Speed Configuration screen, Low Speed Configura-
tion screen, and Alarm Threshold screen.
The NVRam configuration saved to a file includes all three of the saved
configurations plus all the settings of the Security screen, Alarm Threshold
screen, System Interface screen, and Update Flash screen.
MIX 56 by Telect System 1 Directory (CTRL+D)
Help (?)
Save Configuration
------------------
# Name
-- ----------------
1 Working Config
2 Mixed
3 E1 skip
4
5 Save To a File
6 TFTP, Save To a File
Select Number: 1
Configuration Name: Working Config