Texas Instruments TMS320C674X Switch User Manual


 
EMAC Module Registers
www.ti.com
5.50.7 Receive Oversized Frames Register (RXOVERSIZED)
The total number of oversized frames received on the EMAC. An oversized frame is defined as having all
of the following:
Was any data or MAC control frame that matched a unicast, broadcast, or multicast address, or
matched due to promiscuous mode
Was greater than RXMAXLEN in bytes
Had no CRC error, alignment error, or code error
See Section 2.5.5 for definitions of alignment, code, and CRC errors. Overruns have no effect on this
statistic.
5.50.8 Receive Jabber Frames Register (RXJABBER)
The total number of jabber frames received on the EMAC. A jabber frame is defined as having all of the
following:
Was any data or MAC control frame that matched a unicast, broadcast, or multicast address, or
matched due to promiscuous mode
Was greater than RXMAXLEN bytes long
Had a CRC error, alignment error, or code error
See Section 2.5.5 for definitions of alignment, code, and CRC errors. Overruns have no effect on this
statistic.
5.50.9 Receive Undersized Frames Register (RXUNDERSIZED)
The total number of undersized frames received on the EMAC. An undersized frame is defined as having
all of the following:
Was any data frame that matched a unicast, broadcast, or multicast address, or matched due to
promiscuous mode
Was less than 64 bytes long
Had no CRC error, alignment error, or code error
See Section 2.5.5 for definitions of alignment, code, and CRC errors. Overruns have no effect on this
statistic.
5.50.10 Receive Frame Fragments Register (RXFRAGMENTS)
The total number of frame fragments received on the EMAC. A frame fragment is defined as having all of
the following:
Any data frame (address matching does not matter)
Was less than 64 bytes long
Had a CRC error, alignment error, or code error
Was not the result of a collision caused by half duplex, collision based flow control
See Section 2.5.5 for definitions of alignment, code, and CRC errors. Overruns have no effect on this
statistic.
5.50.11 Filtered Receive Frames Register (RXFILTERED)
The total number of frames received on the EMAC that the EMAC address matching process indicated
should be discarded. Such a frame is defined as having all of the following:
Was any data frame (not MAC control frame) destined for any unicast, broadcast, or multicast address
Did not experience any CRC error, alignment error, code error
The address matching process decided that the frame should be discarded (filtered) because it did not
match the unicast, broadcast, or multicast address, and it did not match due to promiscuous mode.
126
EMAC/MDIO Module SPRUFL5B–April 2011
Submit Documentation Feedback
© 2011, Texas Instruments Incorporated