Filter
Top Products
EMAC Module Registers
www.ti.com
5.4 Receive Revision ID Register (RXREVID)
The receive revision ID register (RXREVID) is shown in Figure 42 and described in Table 41.
Figure 42. Receive Revision ID Register (RXREVID)
31 0
RXREV
R-4EC0 020Dh
LEGEND: R = Read only; -n = value after reset
Table 41. Receive Revision ID Register (RXREVID) Field Descriptions
Bit Field Value Description
31-0 RXREV Receive module revision
4EC0 020Dh Current receive revision value
5.5 Receive Control Register (RXCONTROL)
The receive control register (RXCONTROL) is shown in Figure 43 and described in Table 42.
Figure 43. Receive Control Register (RXCONTROL)
31 16
Reserved
R-0
15 1 0
Reserved RXEN
R-0 R/W-0
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Table 42. Receive Control Register (RXCONTROL) Field Descriptions
Bit Field Value Description
31-1 Reserved 0 Reserved
0 RXEN Receive enable
0 Receive is disabled.
1 Receive is enabled.
88
EMAC/MDIO Module SPRUFL5B–April 2011
Submit Documentation Feedback
© 2011, Texas Instruments Incorporated