Toshiba e-STUDIO211c/311c Copier User Manual


 
1
2
3
4
5
6
7
8
9
10
11
12
6-11
4
Press the START key.
Thin Paper/Thick Paper/Special Paper/Sticker Label
1
Perform steps 1 to 2 on page 6-7.
2
Check the thickness of the paper and press the THIN
, THICK1 , THICK2 , THICK3 or THICK4 key, and
then press the SET key. Press the SPECIAL key for
special paper or press the THICK2 key for a sticker
label, and then press the SET key.
3
Specify the paper size.
- Standard size paper Page 6-7 (step 4)
- Non-standard size paper
Page 6-9 (steps 2 to 3)
Select other copy modes as required.
Use the recommended thin paper/thick paper/Special paper/sticker labels if possible. Copy paper sold
at stores is also acceptable, but paper of some brands may not be suitable to acquire a clear image. In
this case, ask your authorized Toshiba dealer.
When the special paper is used, remove the copied paper
from the exit tray frequently.
Thin Paper/Thick Paper/OHP Film/Special Paper/Sticker Label