Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
9-26
WHEN THE GRAPHIC SYMBOLS FLASH ON THE TOUCH PANEL
Saddle Stitch Unit (MJ-1020 only)
1
Perform steps 1 to 3 of the procedure for “6. ADDING
STAPLES Saddle Stitch Unit ”( Page 9-23).
2
Remove the empty staple case.
3
While pushing down on the lever , pull up the knob
.
4
Remove any jammed staples, and then return the
knob to its original position.
Caution
DO NOT touch the stapler. The stapler could injure you.
Stapler
5
Return the staple case to its original position.
- To continue to the next steps Page 9-24 (steps 5 to 7)
7. REMOVING JAMMED STAPLES (OPTIONAL)(Cont.)