Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
10
-4
MAINTENANCE
Is the copier in the energy saving
mode (Automatic Energy Saving
mode)?
Is the access code keyed in? Is
the access code correct?
Is a key copy counter (optional)
used?
Is the “Warming up” message
displayed?
Does the administrator password
input screen appear?
Is interrupt copying set?
Reference page
Page 1-2, 9-4
Page 9-13
Items to be checked
Is the power cord plug firmly in-
serted in the outlet?
Are the front covers(left and
right), the exit cover and the
large-capacity feeder (optional)
firmly closed?
Is the bypass guide firmly
closed?
2. SIMPLE TROUBLESHOOTING
Check the following items, and if the problem still occurs, call service for assistance.
Copier does not start
Countermeasure
Insert the power cord plug firmly.
Close the covers properly.
Close the bypass guide unit properly.
Display does not change when keys or icons are pressed
Press the ENERGY SAVER or START
key on the control panel to clear the mode. (It
takes a while for the copier to become ready.)
Key in the correct access code.
* If the access code is not clear, ask your copier
manager.
If you are using a key copy counter, insert it
into the slot.
Wait until the copier becomes ready.
The administrator password is required. Ask
your copier manager.
Press the
INTERRUPT key on the control
panel to clear the mode.
Page 1-4, 6-33
Page 1-9
Page 1-10
Page 1-8
Page 6-23
Page 2-17