Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
8-18
NETWORK SCANNING FUNCTION (USING THE OPTIONAL PRINTER CONTROLLER)
3. ABOUT THE SETTING BEFORE SCANNING
In advance of scanning, the administrator must set the administrator password to enable the ADMIN
key under this password. (If this setting is not performed, anyone can perform each setting after pressing
the ADMIN key, as a result, the administration of the scanning function becomes difficult.) After this
setting, perform each setting of the FTP server (default setting) and scan user as required.
The user can set or register a template with the scan user name and password when the setting of scan
user by the administrator is completed.
1
Press the
PRINTER/NETWORK key.
2
Press the SCAN SETTING key.
3
The screen on the right is shown. The USER key is
for the user setting and the ADMIN key and
PASSWORD SETTING key are the administrator set-
ting.
- After pressing the USER key Page 8-19
- After pressing the ADMIN key
Page 8-23
- PASSWORD SETTING key
Page 8-30
HELP