Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
3-5
Specifying both Original Size and Copy Size
When the original size and copy size are specified, the reproduction ratio is automatically calculated to
make copies.
* Set the size for “the OTHER” key as required (
Page 6-16). When the set originals or paper are
standard sizes other than A3, A4, B4 or B5, you will select the OTHER key on the screen of step 4
below. Before pressing it, you need to make the OTHER key recognize the same size as the originals
or paper that have been set.
1
Place paper in the drawer(s). Page 2-4
Select other copy modes as required.
5
Press the START key.
4
Press the ORIGINAL SIZE key of the same size as
the original.
- Using the original size and copy size, the correct reproduc-
tion ratio is computed and displayed on the screen.
- OTHER key
Page 6-16
2
Place the original(s). Page 2-9
3
Press the desired drawer, then the ZOOM··· key.
- The copy paper size is selectable on the screen in step 4
as well.