Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
9-6
WHEN THE GRAPHIC SYMBOLS FLASH ON THE TOUCH PANEL
2
Grasping the holder of the toner cartridge, slide the
cartridge along the rail toward you and remove it.
- Please return the used toner cartridges to your service tech-
nician.
Caution
NEVER attempt to incinerate toner cartridges. This could
cause an explosion.
DO NOT dispose of used toner cartridges.
Your service technician will collect them.
3
Shake the new toner cartridge to the right and left 5
or 6 times to loosen the toner inside.
3. REPLACE TONER CARTRIDGE SYMBOL (Cont.)
6
Close the covers in the order of to .
- The following message appears:
Wait adding toner
The copier automatically starts supplying toner.
- When the toner has finished being supplied, the touch panel
returns to the Basic menu. (It takes approx. 4 or 5 minutes
until the toner has finished being added.)
4
Pull out the seal in the direction of the arrow as
shown on the right.
5
Grasping the holder of the new toner cartridge, push
it along the rail fully back into the copier.
- If the toner scatters, wipe it completely off.