Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
2-3
HELP
1 1 2
1
To make multiple sets of copies:
- Key in the copy quantity with the digital keys.
- To correct the input copy quantity, press the
c
CLEAR key.
When paper of the same size as the original has run out:
The corresponding drawer key on the touch panel flashes.
Add paper or select another drawer.
To stop a copy operation Page 2-18
When this message appears: “Wait Performing Auto Cali-
bration”:
The copier may automatically go into the adjustment mode. It
will soon start working. Do not turn OFF the power. Just wait
for a while.
When Coming Across the Situations below
5
Place the next original (2nd side) and press the
START key.
- Set the first page of your originals first.
- You can also press the YES key before pressing the
START key to perform the same operation.
- Repeat this step for the subsequent originals.
6
Once the final original has been scanned, press the
FINISHED key.
When the reversing automatic document feeder (optional) is
used, and the single-feed mode is selected, the procedure is
slightly different from the above.
- Procedure of using the single-feed mode Page 6-3