Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
6-23
10. DEPARTMENT MANAGEMENT
You can administer the copy quantity and print quantity (with the optional printer controller installed) of
each department depending on your purposes by setting an access code.
- Up to 120 codes can be set.
* When you want to set the access codes or reset the counters, the administrator password is needed.
1
Press the PROGRAM key to enter the programme
menu, and press the DEPT. MANAGEMENT key.
- If the key for the desired function is not shown, press the
Pre key or the Next key to switch the screen.
3
The department management menu appears.
- When the administrator password is entered in step 2:
2
Key in the administrator password (5 digits) or the
access code (5 digits).
- Registering the access code Page 6-26
- The setting and changing of the administrator password is
performed by your service technician (ask him/her for de-
tails).
- We recommend you to take a memo in order not to forget
the administrator password.
- When the access code is entered in step 2: