Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
7-6
SELECTING FINISHING MODES (USING THE OPTIONAL FINISHERS)
2
Set the paper size.
For drawer feeding Page 3-3 (step 3)
For bypass feeding Page 6-7 (step 4)
3
Place the original(s). Page 2-9
- When placing them in the reversing automatic document
feeder (optional), set them by referring to the order of pages
in the illustrations above.
- When placing them on the glass, place the first page of the
originals first if MAGAZINE SORT or MAGAZINE SORT &
SADDLE STITCH is selected. If SADDLE STITCH is se-
lected, set them in the order of pages 12-1, (2-11), 10-3, (4-
9), then 8-5, (6-7) by referring to the illustration above as
an example.
12
3
2
1
112
94
76
58
310
112
76
76
12
3
2
1
4. MAGAZINE SORT & SADDLE STITCHING MODE (BOOKLET MODE)
When the Magazine Sort mode is selected, 1-sided originals can be copied and bound like magazines
or booklets. When a finisher with a saddle stitcher (optional, MJ-1020) is installed, you can select the
saddle stitching mode which will automatically staple in the centre of the document. A3, A4-R, B4, LD
and LT-R are available.
- The optional automatic duplexer must be installed.
*This mode cannot be used in combination with the AUTO COLOUR mode (
Page 3-16).
Example of copying a 12-page document
- When MAGAZINE SORT is selected
1
Place paper in the drawer(s). Page 2-4
- When MAGAZINE SORT & SADDLE STITCH is selected
- When SADDLE STITCH is selected
*You can also select the Magazine Sort mode from the editing menu. Page 5-11