Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
USING THE EDITING FUNCTIONS5-4
Select other copy modes as required.
5
Press the START key.
2
Place the original(s). Page 2-9
3
Press the EDIT key to enter the editing menu, and
press the EDGE ERASE key.
4
Adjust the width of the white border, then press the
SET key.
- The default width of the white border is 5 mm.
- To adjust the width, press the
2mm or 20mm key to
select the desired number, then press the SET key.
2. EDGE ERASE
If your original has a dirty or torn edge, it may be reproduced as a black stain on the copy. In that case,
use Edge Erase Copying. A white border is created along the edges of the copy, eliminating those black
stains.
1
Place paper in the drawer(s). Page 2-4
- When using this mode in bypass copying (
Page 6-5),
be sure to specify the paper size.