Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
6-19
Using the built-in weekly timer, you can have the copier automatically turned ON and OFF at specified
times. For instance, you can set the timer for the starting time and closing time of your office so that the
copier will automatically turn itself ON and OFF at those specified times.
- When the weekly timer is in use, the timer lamp on the control panel lights.
* When the power switch is turned off, the weekly timer does not work.
7. WEEKLY TIMER
Setting the Weekly Timer
1
Press the PROGRAM key to enter the programme
menu, and press the WEEKLY TIMER key.
- The WEEKLY TIMER key is half-tone shaded when the
weekly timer has already been set.
- If the key for the desired function is not shown, press the
Pre key or the Next key to switch between the screens.
2
Check the settings on the display, and if corrections
are necessary, press the CHANGE key.
- If no correction is needed, press the SET key.
3
Set the ON/OFF times for each day of the week.
- Use the
Sun and Sat
keys to switch the days of the
week.
- Key in numbers using the digital keys. After entering each
number, press the upper SET key.
- After setting the times for all the days of week, press the
lower SET key. The WEEKLY TIMER key becomes half-
tone shaded.
For holidays when the copier is not turned on, key in the
same times for both ON and OFF, eg. ON:00:00 and OFF:00:00.