Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
8-17
7
Set the FTP user name.
- Press the area as shown on the screen on the
right to switch to the letter input screen. Enter the FTP user
name within 128 letters using the alphabet (touch panel)
and numbers (digital keys), then press the SET key.
8
Set the FTP password and FTP path as in the same
manner as FTP user name.
- Enter the FTP password within 128 letters and enter the
FTP path within 128 letters.
- For the FTP path, specify the directory path on the FTP
server to save the scanned data.
For example, to specify the “ftp://192.168.1.1/ftp-dir/temp”
FTP folder in the FTP server, enter “ftp-dir/temp”.
9
Confirm the contents filled in, then press the SET
key.
- Press the PREV key, then the screen goes back to the
previous one.
10
The preparation to send to the desired FTP server
(or one at the default setting) is completed.
- The FTP key is highlighted.
- If you want to select more than one destination, press the
corresponding keys in destination continuously.
- When all settings of destination are completed, go back to
in step 9 in page 8-5.