Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
6-12
USING THE SPECIAL FUNCTIONS
* Set the OHP films on the sheet bypass vertically (the same as for
A4 placement).
If you set them horizontally (the same as for A4-R placement), the
following message will appear:
Set transparency film in A4 direction
* If you select the OHP film mode, the copy speed becomes slower.
OHP Films
4
Press the START key.
1
Perform steps 1 to 2 on page 6-7.
Up to 40 OHP films can be set at a time. If you will make
copies of more than 40 films, feed them from the exclusive
drawer for OHP films (
Page 2-7).
2
Press the OHP FILM key, then the SET key.
3
A4 is automatically selected for the copy size.
To make copies on OHP films (A4) from horizontally-long
originals such as A3 or B4, press the AMS key on the
screen on the right. The original data will be rotated 90
o
to
make copies as same as the originals.
- Only A4-sized OHP film is acceptable.
- Using OHP films other than the recommended ones may cause jams and make the copier breakdown.
The image quality may be lowered as well and copies cannot be made in clear colour. If you want to use
other kinds of OHP films, ask your authorized Toshiba dealer.
Slide
Select other copy modes as required.
3. BYPASS COPYING (Cont.)