Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
8-26
NETWORK SCANNING FUNCTION (USING THE OPTIONAL PRINTER CONTROLLER)
Setting the FTP Server at the Default Setting
1
Perform steps 1 to 3 in page 8-23.
2
Press the FTP SETTING key.
6
Set the FTP user name.
- Press the area as shown on the screen on the
right to switch to the letter input screen. Enter the FTP user
name within 128 letters using the alphabet (touch panel)
and numbers (digital keys), then press the SET key.
3
Set the FTP server name.
- Press the area as shown on the screen on the
right to switch to the letter input screen. Enter the FTP server
name within 128 letters using the alphabet (touch panel)
and numbers (digital keys), then press the SET key.
You can enter the IP address directly instead of the FTP server
name.
4
Key in the FTP port number (0-65535).
5
Key in the connection time (0-300) in ‘FTP Time Out’.
3. ABOUT THE SETTING BEFORE SCANNING (Cont.)
Setting by the Administrator (Cont.)