Filter
Top Products
Operating Your Vanguard 7300 4-15
Vanguard 7300 Port Configuration
Figure 4-8. Port Configuration Menu
H.323 Dynamic
Coder Parameter
This is a description of the H.323 Dynamic Coder parameter:
For more information, refer to the Vanguard Voice Manual (Part Number T0104-05).
--*Port Number: 2006
--*Port Type: voice
--*Access Type: Digital
--Interface Type: E&M
--Signaling Mode: Normal
--Signaling Control: Immediate
--PCM Mode: A-law
--Compression Rate (KHz): 8GkB
--VAD Control: Enabled
--H.323 Dynamic Coder: Enabled
--Smoothing Delay (msec): 70
Node: Address: Date:Time:
Menu: Configure Path:
Port Configuration
H.323 Dynamic Coder
Range: Enabled, Disabled
Default: Enabled
Description: Specifies whether or not advertising is used to negotiate with a
remote H.323 device.
• Enabled: The H.323 interface advertises all of the coders
supported on this device. The H.323 interface dynamically
negotiates, with the remote H.323 device, for a coder,
bundle format, and VAD setting. If necessary, this port is
re-configured to match the negotiated settings.
• Disabled: The H.323 interface advertises only the current
configuration (compression rate, bundle format, and VAD
setting). Negotiations do not take place. If the remote H.323
terminal cannot match this ports configuration, the call is
cleared.