Filter
Top Products
5-16 Modifying Your Vanguard 7300
Removing and Replacing the CPU Card and CPU Mezzanine Card (PMC)
Figure 5-11. Installing the Ethernet PMC on the IBM750FX CPU Card
7 Position the PMC on top of the card (PMC 1 or 2) as shown in Figure 5-11.
Slide the front edge connectors into the opening labelled “PMC 1 or
PMC 2”.
8 Press the PMC down onto the top of the CPU card. The connectors on the
underside should connect smoothly with the J11/12/13/14 connectors.
9 Insert the short screws at the corners of the PMC and into the standoffs on
the CPU Card. Tighten the screws.
10 Re-install the CPU card into PMC slot 1 on the enclosure according to the
instructions provided in steps 3 to 5.
Step Action (continued)
Ethernet
PMC 1
Ethernet
PMC 2