Filter
Top Products
Introduction
Xerox 4500 PS ETH, Inst. & Operator's Guide
10
1.1.2 TCP/IP protocols
The TCP/IP (Transmission Control Protocol/Internet Protocol) protocol is
routable and enables the Xerox 4500 PS ETH to reside on any network in
an Internet environment.
The following TCP/IP protocols are supported by the Xerox 4500 PS ETH
:
Supported TCP/IP Protocols
IP Layer Internet Layer
IP (RFC 791) Internet Protocol
ARP (RFC 826) Address Resolution Protocol
TCP Layer Transport Layer
TCP (RFC 793) Transmission Control Protocol
UDP (RFC 768) User Datagram Protocol
ICMP Internet Control Message Protocol
Application Layer
Bootp (RFC 951,1048 and 1084) Bootstrap Protocol
LPD (RFC 1179) Line Printer Daemon
SNMP (RFC 1157)
SNMP - MIB II (RFC 1213)
SCS-DCA Datastream
When running in SCS DCA mode, the Xerox 4500 PS ETH will emulate the
Xerox 3x-400 interface products.
The Xerox 4500 PS ETH supports SCS DCA printing via the TCP/IP
LPR/LPD protocol.
The Xerox 4500 PS ETH provides support for SCS DCA and i-data FSL
commands, thus being fully compatible with the ida 812-1x range of
products and emulated IBM printers.
NOTE:
If you do not have TCP/IP on the host, redirected printing can be
performed using the ida ReRouter. For details on redirected printing, see
the separate document included on the diskette “ Redirect” (Redirected
SNA AFP Printing - Token Ring).
1.1.3 NetBEUI/NetBios protocol
With support for the NetBeui/NetBios network protocols, the Xerox 4500 PS
ETH enables printing from Microsoft (Windows 95 and NT) and IBM LAN
network (OS/2) environments using the SMB ( Server Message Block) printer
protocol.