Filter
Top Products
Appendix Section
Xerox 4500 PS ETH, Inst. & Operator's Guide
185
uu is the specific firmware number
XX represents version
Y represents variant
ZZ represents release no. - generally not stated.
e.g.: 0uu020.B80
(microcode level 2, < > product (0))
• Ensure that TFTP read access to this file is allowed.
4. Restart the BOOTP server. The PrintServer checks for new microcode.
5. Power the PrintServer off and back on again.
NOTE:
A microcode upgrade will only be performed if the name of
the microcode file is different from the name of the version
currently operating in the PrintServer.
6. “PSX3 | 5108 Awaiting microcode download” message is now printed.
7. During download, the LEDs will be blinking alternately.
8. Now print a Test Page (by pressing Test button) and check that the
Version number on the test printout has changed to the new Version
(see the following section: “Problem Determination”).