Filter
Top Products
Problem Determination
Xerox 4500 PS ETH, Inst. & Operator's Guide
150
LAN LED is lit but PRT LED is not lit
• AFP printing using TCP/IP
- check that the port number and IP address used by the PPR
(idaPSS, ida ReRouter, AS/400, PSF/2, PSF/AIX) are the same as
those defined on the PrintServer.
IPDS applications must use port nos. 5001 and 5002
ICDS applications must use port nos. 5005 and 5006
• Non-AFP printing using TCP/IP
- check that the IP address used by th e host is that defined in the PrintServer.
PSF indicated communication errors
• Ensure that a PCL printer is attached and powered on.
Message AIN1048E or 0420-049
PSF cannot link to the printer address.
• Check that port number matches that set up for the PrintServer.
• Check that your network is operational (e.g. by using the PING command).
• Check that the printer se ssion you are accessing is not already
assigned to another host such as PSF/2, PSF/AIX, PSF for S/370-
S/390 or PSF/400.
LAN LED is lit, PRT flashes, but no print is produced
• Check that the printer is online.
• Check that a printer intervention is not pending.
Message AIN0029 or 0420-029
• Check that the printer is online.
• Check that a printer intervention is not pe nding.