Filter
Top Products
SNA IPDS and SCS Printing from MVS or VM
Xerox 4500 PS ETH, Inst. & Operator's Guide
129
OS/2 Protocol.ini definitions
[LANDD_nif]
DriverName = LANDD$
Bindings = OLITOKCE_nif
NETADDRESS = "40005a0001C3"
ETHERAND_TYPE = "I"
OS/2 CM/2 gateway definitions
DEFINE_LOCAL_CP FQ_CP_NAME(DKIDTN01.LT)
CP_ALIAS(LT)
NAU_ADDRESS(INDEPENDENT_LU)
NODE_TYPE(EN)
NODE_ID(X'05D00000')
NW_FP_SUPPORT(NONE)
HOST_FP_SUPPORT(YES)
HOST_FP_LINK_NAME(HOST0001)
MAX_COMP_LEVEL(NONE)
MAX_COMP_TOKENS(0);
DEFINE_LOGICAL_LINK LINK_NAME(HOST0001)
ADJACENT_NODE_TYPE(LEARN)
DLC_NAME(IBMTRNET)
ADAPTER_NUMBER(0)
DESTINATION_ADDRESS(X'40003174000104')
ETHERNET_FORMAT(NO)
CP_CP_SESSION_SUPPORT(YES)
ACTIVATE_AT_STARTUP(NO)
LIMITED_RESOURCE(USE_ADAPTER_DEFINITION)
LINK_STATION_ROLE(USE_ADAPTER_DEFINITION)
SOLICIT_SSCP_SESSION(YES)
MAX_ACTIVATION_ATTEMPTS(USE_ADAPTER_DEFINITION)
USE_PUNAME_AS_CPNAME(NO)
EFFECTIVE_CAPACITY(USE_ADAPTER_DEFINITION)
COST_PER_CONNECT_TIME(USE_ADAPTER_DEFINITION)
COST_PER_BYTE(USE_ADAPTER_DEFINITION)
SECURITY(USE_ADAPTER_DEFINITION)
PROPAGATION_DELAY(USE_ADAPTER_DEFINITION)
USER_DEFINED_1(USE_ADAPTER_DEFINITION)
USER_DEFINED_2(USE_ADAPTER_DEFINITION)
USER_DEFINED_3(USE_ADAPTER_DEFINITION);
DEFINE_LOGICAL_LINK LINK_NAME(L1C302)
ADJACENT_NODE_TYPE(LEARN)
DLC_NAME(IBMTRNET)
ADAPTER_NUMBER(0)
DESTINATION_ADDRESS(X'40005A01C30204')
ETHERNET_FORMAT(NO’)
....
DEFINE_GATEWAY_WORKSTATION WORKSTATION_LINK_NAME(L1C302)
WORKSTATION_LU(WORKSTATION_LU_NAME(L1C302)
HOST_LINK_NAME(HOST0001)
NAU_ADDRESS_AT_WORKSTATION(2)
NAU_ADDRESS_AT_HOST(5));
PrintServer Definition file extract
&&??##N1,0# ; Start of file - Don't remove this!
;-------------------------------------------------------- ----------------
; Configuration for the TokenRing PrintServer x3
; (This is an example. Please modify the parameters to match
; your configuration).
; 00824001
;------------------------------------------------------------------------
;*************************************#**********************************