Filter
Top Products
NetBEUI/NetBIOS Printing Using Windows ‘95, NT or OS/2
Xerox 4500 PS ETH, Inst. & Operator's Guide
99
The “Add Printer Wizard” will then open and you may select manufacturor
and printer model via the wizard.
NOTE:
The NP Windows drivers may be obtained from the IBM
Web Site or you may contact your point of purchase for
details.
NOTE:
During the set up, you may need access to the original
installation CDROM for Windows ‘95 and NT.
5.2 OS/2 Setup
To set up the OS/2 operating system follow these instructions:
1. Open an OS/2 window
2. Enter the following command at the prompt:
net view \\ <PrintServer name>
NOTE:
The default PrintServer name is “idaxxxxxx” where the six
“x’es” represent the last six digets of the MAC address
3. Press RETURN
4. Now enter this command:
net use lptx \\idaxxxxxx\Px_Printer_x
5. You have now captured your port for the PrintServer and you next
step is then to install a printer.
[D:\] net view \\ida002efe
Shared resources at \\ida002efe
Net name Type Used as Comment
-----------------------------------------------------------------------------------------------
P1_Printer_1 Print idaPS printer
P2_Printer_2 Print idaPS printer
The command completed successfully.
[D:\] net use lpt1 \\ida002efe\P1_Printer_1
The command completed successfully.
Example of setup for OS/2