Filter
Top Products
Novell Setup for IPX/SPX
Xerox 4500 PS ETH, Inst. & Operator's Guide
92
Type in the name of the Queue to be created. Use the “Browse” button
next to the “Volume” window to browse the NDS Tree for existing NW
Server Volumes (do not choose SYS Volume).
Finally, click the “Create” button to create the NW PrintServer, Printer and
Queue.
Open the Container where the PrintServer is located and double-click on
the PrintServer. The window below will now be displayed:
NOTE:
Information for EPS Set-up:
“Name” = “EPS PrintServer” in PSinst32:
TEST.cse.international.i-data
(be aware that NDS is case sensitive).
Information for ENP Set-up:
“ENP PrintServer” in PSinst32: TEST
(“ENP PrintServer” do only use the Common Name alone
without the context “cse.international.i-data”)