Filter
Top Products
Novell Setup for IPX/SPX
Xerox 4500 PS ETH, Inst. & Operator's Guide
94
Below is a screen dump of the System Console after executing the
CONFIG command:
File server name: CSE
IPX internal network number: 336DE04A
Node address: 000000000001
Frame type: VIRTUAL_LAN
LAN protocol: IPX network 336DE04A
Server Up Time: 12 Days 23 Hours 42 Seconds
IBM PCI Token Ring Adapter Hardware Specific Module
Version 1.02 1 June 1996
Hardware setting: Slot 6, I/O ports 4400h to 44FFh, Interrupt Bh
Node address: 0004AC57BC49
Frame type: TOKEN-RING
Board name: IBMTRPO_1_TOK
LAN protocol: IPX network 00002001
IBM PCI Token Ring Adapter Hardware Specific Module
Version 1.02 1 June 1996
Hardware setting: Slot 6, I/O ports 4400h to 44FFh, Interrupt Bh
Node address: 0004AC57BC49
Frame type: TOKEN-RING_SNAP
Board name: IBMTRPO_1_TSP
LAN protocol: ARP
LAN protocol: IP address 128.0.119.100 mask FF.FF.0.0 interfaces 1
Tree Name: IDA
Bindery Context(s):
cse.international.i-data
CSE:
NOTE:
Information for idaPrintServer Set-up:
“File server name” = “NCP Preferred Server” in Psinst32: CSE
“EPS File Server” in Psinst32: CSE
“ENP File Server” in Psinst32: CSE
Information for idaPrintServer Set-up:
“Tree Name” = “NCP Preferred DS-Tree” in PSinst32:
IDA
“Bindery Context” = “NCP DS Context” in PSinst32:
cse.international.i-data
(the first Bindery Context is the context where the NW File
Server is located in the NDS Tree).