Filter
Top Products
WIndows NT Printing Using TCP/IP LPR/LPD
Xerox 4500 PS ETH, Inst. & Operator's Guide
108
8. Windows NT Printing Using TCP/IP
LPR/LPD
Windows NT version 3.51
This section describes how to select an LPR/LPD printer from Windows
NT version 3.51.
1. From the Main menu select the icon “ Control Panel”.
2. Select the “Network” icon.
Make certain that the entry “ Microsoft TCP/IP Printing” is entered into
the menu “Installed Network Software”.
If not, click on “Add Software”.
From here you select the above mentioned network software from the
list.
For details on installation, refer to your Windows NT documentation.
3. From the “Control Panel” menu select the “Printer” icon.
4. From the “Print Manager” select the menu “Printers” and double-click
on “Create Printers”.
5. Enter a name for the printer in “ Printer Name”.
6. Select appropriate driver.
7. From the pull-down list in “ Print to”, select the option “ Other”.
8. From the list in “ Print Destination” select “LPR Port”.
9. Press “OK” to confirm.
10. You are now prompted to enter the IP address of the Xerox 4500 PS
ETH and the name providing LPD.
11. In the menu “Name of printer on that machine” you make an entry for
the default configuration “LPDPRT1”.
12. Press “OK” to confirm.
An LPD printer has now been added.