Filter
Top Products
PSF/MVS AFP Printing Using TCP/IP
Xerox 4500 PS ETH, Inst. & Operator's Guide
123
13. PSF/MVS AFP Printing Using TCP/IP
This chapter provides:
JES installation statements
PSF Startup Procedures
Once these parameters have been configured, and the basic TCP/IP
installation of the Xerox 4500 PS ETH IPC (equipped with an IPDS top)
has been completed, direct AFP / IPDS from PSF / MVS will be possible.
Requirements:
- use of PSF/MVS version 2.2.0 with PTF level UW21345
MTU size
• The Maximum Transmission Unit (MTU) of the IP packet for the
MVS system is recommended to be set up to 2000.
NOTE: The MTU size should not exceed the maximum size sent through
the control unit. Failure may lead to transmission problems.
13.1 PSF/MVS direct attachment
Sample PSF/MVS JES2 initialisation statements
FSSDEF(FSS1)PROC=PSF4,HASPFSSM=HASPFSSM
PRT420,FSS=FSS1,MODE=FSS,PRMODE=(LINE,PAGE),
CLASS=A,UCS=0,SEP,NOSEPDS,CKPTPAGE=100,
DRAIN,WS=(R,Q/FCB)
Example of PSF/MVS JES2 printer definition