Filter
Top Products
PSF/2 AFP Printing Using TCP/IP
Xerox 4500 PS ETH, Inst. & Operator's Guide
139
17. PSF/2 AFP Printing Using TCP/IP
This chapter provides details on how to:
Create an IPDS printer profile
Setup the “Keep Alive” TCP/IP feature
Requirements:
Before IPDS printing using TCP/IP can be accomplished, the following
points need to be checked:
1. OS/2 2.0 with APAR IR28716 or later version must be installed.
2. TCP/IP 2.0 with CSD UN64092 or later version must be installed
3. PSF/2 1.10 with CSD UR41102 or later version must be installed
Once the above conditions have been met and the basic TCP/IP
installation of the PrintServer (IPDS) been completed before direct
AFP/IPDS from PSF/2 will be possible.
17.1 Creating a new printer profile
From the PSF/2 control panel you make the following selections:
1. Select Profile
2. Select New
The following panel will appear: