Filter
Top Products
NetBEUI/NetBIOS Printing Using Windows ‘95, NT or OS/2
Xerox 4500 PS ETH, Inst. & Operator's Guide
98
5. NetBEUI/NetBIOS Printing Using
Windows ‘95, NT or OS/2
This chapter provides instructions for setting up the Windows ‘95, NT or
OS/2 operating systems for native printing via the Xerox 4500 PS ETH
using the NetBEUI/NetBIOS protocols.
Before you begin the setup procedure, please ensure that the
NetBEUI/NetNIOS protocols have been properly installed on your
network.
5.1 Windows ‘95 and NT Setup
To set up the Windows ‘95 and NT systems follow the below instructions:
Via the “Network Neighborhood” icon on your desktop, you select the
“entire network” entry. Now open the default “Workgroup”.
The default name of the PrintServer will appear in the workgroup like this:
Now doubleclick the name of the PrintServer for configuration
of the printers available in the PrintServer:
Again you doubleclick this entry to enter the printer selection mode. You
will encounter the following query to which you answer “yes”:
Last 6
digets of
MAC
address
Only appears if
PAR2 has been
set to output