Filter
Top Products
Novell Setup for IPX/SPX
Xerox 4500 PS ETH, Inst. & Operator's Guide
91
4.5 NetWare setup - DS mode: PrintServer and NW4.1x
Configuration
This description allows you to quickly configure one NetWare 4.1X Server
including PrintServer, Printer and Queue plus the Xerox PrintServer for
Native printing via IPX/SPX.
During this description, we will be using the “Nwadmn95/NT” GUI
administration tool for the configuration of NetWare and the i-data
PrintServer Configuration Tool, “PSinst32”, for the configuration of the
Xerox PrintServer.
When setting up, it is important that you make sure you have always
defined a PrintServer, a Printer and a Queue on the NetWare System.
Using the “Print Services Quick Set-up...” you can define all of this in one
step.
Start the Nwadmn95/NT:
Browse through the NDS Tree and highlight the Container Object in which
the PrintServer, Printer and Queue should be located. Select “TOOLS”
from the Menu Bar and then “Print Services Quick Set-up”:
Type in the name of the PrintServer to create it or use the “Browse” button
next to the PrintServer Name window to browse the NDS Tree for existing
PrintServers (only if the EPS is not going to be used in the Xerox
PrintServer, meaning that the PSERVER.NLM is loaded on a NetWare
File Server).
Type in the name of the Printer to be created and set the Type to
“Other/Unknown”.