Filter
Top Products
Appendix Section
Xerox 4500 PS ETH, Inst. & Operator's Guide
165
END
6. Make a settings printout to verify the new settings.
Appendix A 2: Configuration file parameters
This appendix describes the entire range of parameters available for
programming the PrintServer.
BEGIN_CONFIGURATION IDAPS
LOCAL_MAC
Description: Sets the locally administered MAC address
Range: 0x400000000000 - 0x7FFFFFFFFFFF
Default: N/A
SEL_MAC
Description: Selects the universally defined or the locally
administered MAC address
Range: LOCAL (0)
UNIVERSAL (1)
Default: UNIVERSAL
ENABLE_TCPIP
Description: Enables or disables the TCP/IP protocol
Range: NO (0)
YES (1)
Default: YES
ENABLE_NETWARE
Description: Enables or disables NetWare (IPX/SPX)
protocols.
Range: NO (0)
YES (1)
Default: YES
ENABLE 802_2
Description: Enables or disables the 802.2 settings
Range: NO (0)
YES (1)
Default: YES
ENABLE_PU_LU
Description: Enables or disables the use of the NetWare (IPX/SPX)
protocols.