Filter
Top Products
Novell Setup for IPX/SPX
Xerox 4500 PS ETH, Inst. & Operator's Guide
88
Configuring the ENP via configuration file, see chapter 3.
The following keywords are ENP specific and must be specified in
either TELNET, PSinst32 or the configuration file.
ENP mode: Selects which mode to use.
Options are Bindery and DS mode.
ENP printer number: Selects which Novell NetWare
printer number to use.
Printserver: Selects which Novell NetWare
printserver to use.
Fileserver: Selects which Novell NetWare
fileserver to attach to.
NOTE: The Xerox 4500 PS ETH is able to support up to 2 ENPs. Each
Xerox 4500 PS ETH with a defined EPS is able to support up to
16 ENPs.
Printing command example
When the user wishes to send a print job to the attached printer, the
following command can be used:
Example: NPRINT MYPRINT Q=PQ2
Where PQ2 is the queue supported by the NPRINTER.
This functionality is set via keyword parameters in the configuration file.