Filter
Top Products
100 •Main Menu XEROX WIDE FORMAT COPY SYSTEM
To adjust the power saver:
1. Press the Menu key. The MAIN MENU screen is displayed.
2. Press the Enter key to select CONFIGURATION. The
CONFIGURATION menu screen is displayed.
3. Press the Next key until POWER SAVER is highlighted.
4. Press the Enter key to select POWER SAVER. The POWER
SAVER screen is displayed.
POWER SAVER
POWER SAVER DELAY (0
−
4 HR): 3
5. Use the numeric keypad to enter the power saver value. The
valid value range is 0 to 4 hours. The factory default is 3 hours.
6. Press the Enter key to confirm the value.
7. Press the Exit key to return to the CONFIGURATION menu
screen.
The SCANNER CONTROL option of the CONFIGURATION menu allows
you to set the options for how the Scanner starts and finishes a scan. It
contains the following features:
• AUTOSCAN - Tells the Scanner either to start the scan
automatically when the document is inserted (ENABLED), or to
wait until the Start key is pressed (DISABLED). ENABLED is
the factory default setting.
• DOCUMENT RETURN - Tells the Scanner, after the scan, either
to return the document to the front of the Scanner (FRONT), or
to drop the document from the rear of the Scanner into the catch
tray (REAR). REAR is the factory default setting.
NOTE: Refer to Controlling the Scan for additional information.
• MODE:
• MANUAL WIDTH - The user must enter the document width
and very carefully center the document. In this mode the
document will be prescanned.
• AUTOWIDTH - Enables the automatic detection of the width
of the document. . In this mode the document will be
prescanned.
• AUTOWIDTH/AUTOCENTER - Enables the automatic
centering of the image and automatic width detection. This
selection is the default. . In this mode the document will be
prescanned.
• PRODUCTIVITY:. This feature does not use AUTOCENTER
requiring the operator to manually align the document within
SCANNER CONTROL