Filter
Top Products
XEROX WIDE FORMAT COPY SYSTEM Making copies • 47
Making copies
Making copies
When the Graphical Display indicates READY TO COPY, the WIDE
FORMAT COPY SYSTEM is ready to make copies.
NOTE: The X2 TECH printer does not currently support the Copying
mode.
Several settings are available for controlling how the Scanner starts and
finishes a scan. These settings are accessible from the SCANNER
CONTROL option of the CONFIGURATION menu.
SCANNER CONTROL
DOCUMENT RETURN:
AUTOSCAN
MODE:
4
FRONT
PRODUCTIVITY — ARCH
When making a copy, you need to be aware of these settings. If any of
these settings have been changed from the default settings, the Scanner
may not operate according to your expectations.
Below is a brief summary of the scan control settings. For complete
information about these settings, refer to "Scanner Control" in the "Main
Menu" section of this manual.
AUTOSCAN
AUTOSCAN enabled is the default setting. Normally, the AUTOSCAN
mode is enabled. When it is enabled, the Scanner automatically begins
the scanning of a document when the document is inserted. If
AUTOSCAN is disabled, the Scanner transports the document to the
starting position and then waits for you to press the Start key before
beginning the scan.
DOCUMENT RETURN
FRONT is the default setting. When the DOCUMENT RETURN feature
is set to FRONT, the Scanner returns the document to the front or
Controlling the scan