Filter
Top Products
XEROX WIDE FORMAT COPY SYSTEM Getting to know the WIDE FORMAT COPY SYSTEM • 29
NOTE: Ensure that the Scanner is switched on first and the P is
displayed in the Status Indicator window before powering on the
Controller.
The KLF Controller and the X2 TECH printer each have their own power
switch. When powering them on, first power on the printer, then the
scanner, wait for the P to be displayed, then power on the Controller.
The Scanner requires about 45 seconds to warm up and initialize after
you power on the WIDE FORMAT COPY SYSTEM. Once the
initialization is complete, the READY screen is displayed. Below is an
example of the READY screen.
READY TO COPY
INSERT DOCUMENT
AUTO
1
100.0 %
You can now insert a document into the Document Feed Tray of the
Scanner. The Scanner will then transport the document to the starting
position. This transportation of the document is called staging.
If you cannot insert a document into the feed mechanism and achieve
staging after approximately 4 minutes, refer to the "Problem solving"
section of this guide.
Switching on the
Printer and the
Controller (X2 TECH)
Scanner Warm-up