Filter
Top Products
Scanning from TWAIN and WIA
Xerox
®
DocuMate
®
4790
User’s Guide
7-128
Custom document sizes
Select the measurement units you want to use from the Units list.
If the Document size list does not include the document size for your scanning batch, click in one of the fields
below the document size list. Input the width of the document in the first field, then input the length in the
second field. You can only specify values within the scanner's minimum and maximum supported item size.
Please refer to the maintenance section of the scanner user's guide for this information.
Please refer to Long Document if your scanner supports page lengths greater than 17 inches and you want to
scan long pages.
Long Document
Select Long document to enable support of paper sizes up to the scanner maximum. After you select this option
make sure you input the page length for your document in the custom input field, located below the Document
size selection list. When the value in the custom field is less than the actual document length, the scanned page
will be split across multiple images. For example, if you are scanning a document that is 22 inches long, and the
field is set to 11 inches, the final scan will be split across 2 images.
Note: the document you want split across multiple images does not have to be unusually long. You can scan any
item within the scanner’s supported paper sizes and the images will be split based on the length in the custom
document size field.
Note that some of the options in the scanner interface cannot be used when the page length will be greater than
17 inches. When you select this option, incompatible options will either be automatically disabled or the setting
will simply be discarded while scanning.
Manual Feed
Select this option to enable a delay from when the last page is scanned and when the scanner stops the scan job.
This allows you to scan one page at a time without having to click Scan for each page you put in the scanner.
To scan with manual feed mode:
1. Select Manual feed in the scanner’s interface.
2. In the Timeout field, input the amount of time you want the scanner to wait from when the last page is
scanned and when the scanner stops scanning.
3. Place a document in the scanner.
4. Click Scan.
5. The scanning progress dialogue on-screen will display a countdown indicating how much time you have to
place the next document in the scanner.