Filter
Top Products
Scanning from TWAIN and WIA
Xerox
®
DocuMate
®
4790
User’s Guide
7-136
Imprinter Panel Options
Use the imprinter tab to set the options for printing data on the pages as they are scanned. The imprinter options
are only available if you have an imprinter unit installed in the scanner. Depending on your scanner model, you
may have two imprinter options in the TWAIN interface. Only the imprinter options appropriate for your scanner
will be available in the interface.
Use imprinter—select this option to enable the features in the Imprinter tab for you to configure the text strings
you want to have printed on the page.
If you are using a scanner that has two imprinters installed, select the imprinter you want to configure from the
list. Only one imprinter can be used at a time, you cannot enable and configure both imprinters.
• Pre-imprinter—prints the character strings defined on this tab on the pages before the pages are scanned.
These strings then appear in the scanned image. The pre-imprinter only prints on the simplex (face up) side
of the page.
• Post-imprinter—prints the character strings defined on this tab on the pages after they are scanned. The
post-imprinter only prints on the duplex (back) side of the page.
Text format template—input the text you want to have printed on the scanned pages. The following table
shows the available alphanumeric characters and symbols that can be printed. A maximum of 72 characters can
be printed, which includes text you type in the input field as well as any tokens you select from the token list.
Tokens—click the down arrow and select a token from the list, then click the arrow button to add that value to
the character string field. You can add up to 3 tokens from this token list. The amount of text you can type in the
Text format template field will be reduced by the number of characters that will be printed using the tokens you
selected.
• {FN} – inserts the scanner name.
• {User} – inserts the user name.
• {Mach} – inserts the computer name.
• {#_b} – inserts the step number with spaces padding the number based on the select number of Counter
digits.