3Com 2200 Switch User Manual


 
9-6 CHAPTER 9: SETTING UP THE SYSTEM FOR ROVING ANALYSIS
You are then prompted for an FDDI port through which the data should be
forwarded, as shown below:
Select FDDI port (1-2): 2
Once you successfully configure a port to monitor, all the data received and
transmitted on the port is forwarded to the selected analyzer port, as well
as processed normally.
Stopping Port
Monitoring
After analyzing an Ethernet port, you can remove it from the roving analysis
configuration.
To remove a port configured for monitoring:
1 From the top level of the Administration Console, enter:
analyzer stop
2 Press Return to select Ethernet as the port type.
3 Enter the number of the Ethernet port currently being monitored.
Port data is no longer copied and forwarded from that port to the selected
analyzer port.
Top-Level Menu
system
ethernet
fddi
bridge
ip
snmp
analyzer
script
logout
display
add
remove
start
stop