Filter
Top Products
13-10 CHAPTER 13: CONFIGURING ADDRESS AND PORT GROUPS TO USE IN PACKET FILTERS
As you enter addresses and ports, the system attempts to remove them
from the group.
If the address or port is not found in the group, a warning message is
displayed, as shown here:
Warning: Specified address was not a member of the
address group.
OR
Warning: Specified port was not a member of the port
group.
When this message occurs, the specified address or port is ignored and you
are prompted for the next one to be removed.
Address group
example
In this example, two Ethernet addresses are removed from the Marketing
address group.
Select address group to be modified [1-4]: 4
Removing addresses from group 4 - Marketing
Enter the addresses to be removed - type q to return to the menu:
Address:
08-37-21-65-78-c4
Address: 08-42-21-84-78-f1
Address: q
Port group example In this example, an Ethernet and an FDDI port are removed from the
Education port group.
Select port group to be modified [1-4]: 4
Removing ports from group 4 - Education
Enter the ports to be removed - type q to return to the menu:
Port:
FDDI 1
Port: Ethernet 4
Port: q