Using Menus to Perform Tasks 2-5
FDDI Menu
From the fddi menu, you can view information about and configure the
FDDI station, paths, MAC, and ports. (See Figure 2-3.) For example, to enable
the LLC service of the FDDI MAC, you enter fddi at the top-level menu, mac
at the fddi menu, and then llcService at the mac menu.
Figure 2-3 FDDI Menu Hierarchy for Administer Access
Bridge Menu
From the bridge menu, you can view information about and configure
bridge-level parameters, including those for the Spanning Tree Protocol
(STP). You can also configure the bridge at the port level and administer
packet filters. (See Figure 2-4.) For example, to set the Spanning Tree state
for a bridge port, you enter bridge at the top-level menu, port at the
bridge menu, and stpState at the port menu.
Top-Level Menu fddi menu station menu
system
➧station
display
ethernet
➧path
connectPolicy
➧fddi ➧mac
tNotify
bridge
➧port
statusReporting
ip
snmp path menu
analyzer
display
script tvxLowerBound
logout tmaxLowerBound
maxTreq
mac menu
summary
detail
frameErrorThreshold
notCopiedThreshold
llcService
path
port menu
display
lerAlarm
lerCutoff
label
path