Filter
Top Products
Removing Addresses or Ports from a Group 13-9
Port group example
This example shows a port successfully added to the Manufacturing port
group.
Select port group to be modified [1-4]: 2
Adding ports to group 2 - Manufacturing
Enter the ports to be added - type q to return to the menu:
Port:
Ethernet 3
Port: q
Removing
Addresses or
Ports from a
Group
When removing addresses or ports from a group, you can enter the
addresses or groups at the prompts. At least one group must exist to
remove an address or port.
To remove addresses or ports from an address group:
1 For address groups, enter the following command from the top level of the
Administration Console:
bridge packetFilter addressGroup
OR, for port groups, enter the following command:
bridge packetFilter portGroup
2 To remove an address from a group, enter:
removeAddress
OR, to remove a port from a group, enter:
removePort
3 Enter the number of the group to modify.
4 Enter the addresses or ports to remove from the new group. Type
q after
entering all the addresses or ports.
Enter the addresses in MAC format as:
xx-xx-xx-xx-xx-xx
Enter the ports in the syntax:
< Ethernet | E | FDDI | F > [port] < port number >
Top-Level Menu
system
ethernet
fddi
➧bridge
ip
snmp
analyzer
script
logout
display
ipFragmentation
ipxSnapTranslation
addressThreshold
agingTime
stpState
stpPriority
stpMaxAge
stpHelloTime
stpForwardDelay
stpGroupAddress
port
➧packetFilter
list
display
create
delete
edit
load
assign
unassign
➧addressGroup
➧portGroup