Filter
Top Products
Assigning Packet Filters to Ports 12-23
it meets the forwarding criteria. A packet that does not meet the forwarding
criteria defined in the filter is discarded.
To assign a packet filter:
1 From the top level of the Administration Console, enter:
bridge packetFilter assign
2 Enter the id number of the packet filter to be assigned. To get the id of the
packet filter, you can list all packet filters as described in “Listing Packet
Filters” on page 12-2.
3 Enter the port type (
Ethernet, FDDI, all).
4 Enter the port(s) to assign the filter.
5 Enter the path(s) you want to place the filter (
txA, txM, rxA, rxM, all).
In this example, the assignment is to the transmit all (txA) path and the
receive all (rxA) path on port 1.
Select filter [1-n]: 1
Select port type(s) (Ethernet,FDDI|all) [Ethernet,FDDI]:
FDDI
Select port(s) (1-16|all) [1-16]: 1
Select path(s) (txA,txM,rxA,rxM|all): txA,rxA
The ports are limited to those that have at least one path unassigned, while
the paths are limited to those that are unassigned. Because you can specify
multiple selections at each level, you can assign a wildcard that attempts
to assign the filter to the set indicated by the ports and paths taken in
combination.
One or more assignments might fail because of a previous assignment.
Top-Level Menu
system
ethernet
fddi
➧bridge
ip
snmp
analyzer
script
logout
display
ipFragmentation
ipxSnapTranslation
addressThreshold
agingTime
stpState
stpPriority
stpMaxAge
stpHelloTime
stpForwardDelay
stpGroupAddress
port
➧packetFilter
list
display
create
delete
edit
load
➧assign
unassign
addressGroup
portGroup