Filter
Top Products
11
ADMINISTERING BRIDGE PORTS
This chapter describes how to view bridge port information and configure
the following:
■ Multicast packet threshold
■ Spanning Tree Protocol (STP) parameters
■ Bridge port addresses
Displaying
Bridge Port
Information
Bridge port information includes the STP configurations for the bridge port.
You can display this information in both summary and detail formats.
To display bridge information:
1 From the top level of the Administration Console, enter:
bridge port summary
OR
bridge port detail
You are prompted for the port type.
2 Enter
Ethernet, FDDI, or all.
You are prompted for port number(s).
3 Enter the number(s) of the port(s) or
all to view port parameters for all
ports on the bridge.
Top-Level Menu
system
ethernet
fddi
➧bridge
ip
snmp
analyzer
script
logout
display
ipFragmentation
ipxSnapTranslation
addressThreshold
agingTime
stpState
stpPriority
stpMaxAge
stpHelloTime
stpForwardDelay
stpGroupAddress
➧port
packetFilter
➧summary
➧detail
multicastLimit
stpState
stpCost
stpPriority
address