Filter
Top Products
Running Scripts of Administration Console Tasks 2-15
# This script performs some start-up configurations.
#
# Set the Console serial port baud rate.
#
system consoleSpeed
300 # Console port baud rate
#
# Set the system name
#
system name
Engineering Switch2200_4
#
# Assign an IP address to the Switch 2200.
#
ip interface define
158.101.112.99 # IP address for the system
255.255.0.0 # subnet mask
158.101.255.255 # broadcast address
1 # cost
all # ports
#
ip interface display
#
# Validate access to management workstation
#
ip ping
158.101.112.26 # management workstation address
#
# Enable the Spanning Tree Protocol
#
bridge stpState enabled
#
# Configure my node as an SNMP trap destination
#
snmp trap add
158.101.112.26 # management workstation address
all # turn on all traps
q # no more trap destinations
#
snmp trap display
#