Filter
Top Products
INDEX 7
S
SAGM (source address group mask) 13-1
screen height
adjusting 2-10
scripts for the Administration Console
examples 2-15
running 2-13
serial port (console)
for management 3-1
rebooting the system 4-4
setting baud rate 3-2
Service Access Points (SAPs)
and packet filters 12-4
shiftl opcode A-8
shiftr opcode A-8
SMT (Station Management)
and FDDI stations 8-1
lerAlarm value 8-21
lerCutoff value 8-21
SMT event
enabling proxying 3-20
proxying defined 3-19
Sniffing. See roving analysis and analyzer
SNMP
See also trap and community strings
community strings
setting 3-16
values 3-15
displaying configurations 3-15
menus 2-7
proxying remote SMT events 3-20
trap reporting
and SMT event proxying 3-19
configuring destinations 3-17
descriptions of traps 3-17
displaying configuration 3-16
flushing addresses 3-19
SNMP agent
accessing through IP 3-1
defined 3-15
SNMP trap
Address Threshold 3-17
addressThresholdEvent 10-6
Authentication Failure 3-17
Coldstart 3-17
MAC Duplicate Address Condition 3-17
MAC Frame Error Condition 3-17
MAC Neighbor Change 3-17
MAC Not Copied Condition 3-17
MAC Path Change 3-17
New Root 3-17
Port EB Error Condition 3-17
Port LER Condition 3-17
Port Path Change 3-17
Port Undesired Connection 3-17
SMT Hold Condition 3-17
SMT Peer Wrap Condition 3-17
System Overtemperature 3-17
Topology Change 3-17
socket values filter 12-12, 12-15
software
backup NV data 6-1, 6-2
build date and time 4-1
from factory 1-1
version number 4-1
source address group mask (SAGM) 13-1
source port group mask (SPGM) 13-1
Spanning Tree Protocol. See STP
SPGM (source port group mask) 13-1
SRF (Status Report Frames)
and FDDI stations 8-2, 8-5
and lerAlarm 8-20
stack 12-5
static route status 3-8
station. See FDDI station
Station Management. See SMT
statistics
baselining 5-1
Ethernet ports 7-3
FDDI MAC 8-10, 8-11
FDDI path 8-6
FDDI station 8-2
IP 3-14
Status Report Frames. See SRF
status reporting
configuring 8-5
defined 8-5
STP (Spanning Tree Protocol)
bridge priority, setting 10-7
designated bridge 11-3
designated cost 11-3
designated port 11-3
designated root 11-3
enabling on bridge 10-7
enabling on bridge port 11-8
forward delay, setting 10-9
group address, setting 10-10
hello time, setting 10-9
maximum age, setting 10-8
port priority 11-10
states 11-5
subnet mask
for IP address 3-3
in routing table 3-7