Filter
Top Products
Installing and Configuring the NetWare Driver
59
13 Press Insert.
The Select From the List of Configured Protocols screen appears.
For NetWare 5.x:
■ The default To a Network Interface is selected. Press Enter.
The Select a Configured Network Interface screen appears.
■ Select the board. For example, enter: 3c99x_1, and then press Enter.
14 When prompted, enter the network number, and then press Enter.
15 In the Frame Type field, press Enter to display a list of frames, choose a frame, and
press Enter.
16 Press Esc.
You are prompted to save the changes.
17 Press Enter to save the changes.
The configured Protocol to Network Interface Bindings screen appears.
18 Press Esc to Exit.
The Main menu appears.
■ NetWare 4.11: Restart the server.
■ NetWare 5.x:
■ Select Reinitialize System.
■ Press Enter to reinitialize.
19 Press Esc to exit from the program.
Installing the Server Driver and Advanced Server Features Using
AUTOEXEC.NCF
You can also install the server driver by editing (or adding new) LOAD commands in the
AUTOEXEC.NCF file.
With NetWare installed and the server up and running, complete the following steps to
install and configure the driver and 3Com Advanced Server technology server features on
a NetWare file server.
In NetWare screens, use the arrow keys to select an item, and then press Enter.
Loading the 3Com EtherCD
NetWare 4.11 Insert the CD in the CD-ROM drive and enter these commands:
load cdrom
cd mount ecd200p99x
NetWare 5.x Insert the CD in the CD-ROM drive and enter this command:
load cdrom
Wait for the message that states the CD is mounted successfully, and then
proceed to copy the driver.