Filter
Top Products
6 Installing NetWare Drivers
70
help
This command displays the syntax for the 3Com Advanced Server server features
commands.
link timeout
When a group is being created, the software waits the number of seconds specified by
this command for the link/topology check to finish and then displays timeout
information.
probe interval
This command sets the probe packet interval. If no argument is specified or the specified
argument is invalid, the current value is displayed. Otherwise, the new value is displayed.
receive timeout
This command sets the receive timeout individually for each group and displays a message
for each loaded frame type.
Syntax lbrsl help
Syntax lbrsl link timeout seconds
where:
seconds is the time in seconds.
Example lbrsl link timeout 10
Default 5
Syntax lbrsl probe interval seconds
where seconds is the interval in seconds.
Example lbrsl set probe interval 1
Default 1 second
If the delay is longer than 1 second, NIC or link
failures are not recognized as quickly.
Syntax lbrsl receive timeout pri_slot seconds
where:
pri_slot is the PCI slot number of the primary NIC.
seconds is the time in seconds
Example lbrsl receive timeout 10001 1
Default 1 second