3Com MSR 50 Network Router User Manual


 
54 CHAPTER 2: SMART INTERFACE CARDS
The card transmits data in the high frequency band above 138 kHz. Therefore, it
can provide services on the same line without interfering with the ISDN service
being provided on the same line. It provides downlink rates in the range 32 kbps
to 8 Mbps and uplink rates in the range 32 kbps to 1 Mbps.
The SIC-1ADSL-I interface card delivers these features:
Manual ADSL line activation and deactivation, providing a convenient fault
location means.
A G.992.1-compliant interface, auto-sensing.
Trellis coding on ADSL interfaces, enhancing the stability of ADSL connection.
n
For H3C MSR 20-40 and MSR 30/50 series routers, a SIC-1ADSL-I interface card
can only be installed in SLOT2 or SLOT4.
Interface Attributes The following table describes the interface attributes of the SIC-1ADSL-I.
Interface LEDs The following figures illustrate the SIC-1ADSL-I panel:
Figure 49 SIC-1ADSL-I panel
The following table describes the LEDs on the SIC-1ADSL-I panels.
Table 27 Interface attributes of the SIC-1ADSL-I
Attribute 1ADSL-I
Connector RJ-11
Number of connectors 1
Interface standard ITU-T 992.1 G.DMT
ANSI T1.413 Issue 2
ITU-T 992.3
ITU-T 992.5
Interface rate Downlink: 8 Mbps
Uplink: 1024 kbps
Interface cable Regular telephone cable
Supported services ADSL over ISDN
Table 28 LEDs on the SIC-1ADSL-I panel
LED Description
LINK OFF means no link is present; ON means a
link is present.